Cap Units

Cap units put the finishing touch on your VERSA-LOK retaining wall. They're available in two styles—A and B—and are 3-5/8" tall by 14" wide (at the face). Caps can be used with all types of designs. For straight walls, use both caps alternately. Outside curves require A caps only while inside curves use B caps.

Product and color availability might be limited in some regions. Contact your local dealer for more information.

Case Study

Taming Billy Goat Hill

VERSA-LOK segmental retaining walls provided a solid solution for a residence with a steep, unusable slope in the back yard.

View

Case Study

Leaky Condo Garage Remedied

When water started seeping into an underground parking garage below a four-story condominium building in St. Paul, Minn., the property managers knew that the only solution was to re-waterproof the exterior block of the garage.

View

Units

A Cap

Depth (in):12
Depth (mm):304.8
Height (in):3.625
Height (mm):92.1
Face width (wide) (in):14
Face width (wide) (mm):355.6
Face width (narrow) (in):12
Face width (narrow) (mm):304.8
Face area (sq. ft.):0.352
Face area (sq. m.):0.032
Weight (lbs):40

B Cap

Depth (in):12
Depth (mm):304.8
Height (in):3.625
Height (mm):92.1
Face width (wide) (in):14
Face width (wide) (mm):355.6
Face width (narrow) (in):16
Face width (narrow) (mm):406.4
Face area (sq. ft.):0.352
Face area (sq. m.):0.032
Weight (lbs):50

​Additional available literature

Mail Download
VERSA-LOK SRW Capabilities Brochure

VERSA-LOK SRW Capabilities Brochure

This brochure provides an introduction to VERSA-LOK's solid, top-pinning retaining wall systems.